Aruba Access Point-AP 515-Indoor-WPA3-MPSK-Enhanced Open-160mhz Bandwidth-WiFi 6-MU MIMO-OFDMA-VPN Tunnel-Tri band-IOT Capabilities-Bluetooth 5.0-Zigbee

Providing high-performance connectivity for IoT and mobility requirements in any organization, these Wi-Fi 6 access points are great. With peak data rates of 2.69Gbps, each provides high reliability and speed.

KEY POINTS:

• Up to 2.69Gbps peak data rate
• WPA3/Enhanced Open security enhancements
• Integrated technology that resolves sticky clients
• MU-MIMO and Multiuser OFDMA for enhanced fidelity
• Support Smart IoT with Bluetooth 5 and Zigbee
• Embedded ranging technology for indoor location

SPECIFICATION:

PRODUCT FEATURES

Efficiency

• Improves Wi-Fi performance and reduces airtime contention. 
• Includes Orthogonal frequency-division multiple access (OFDMA), multi-user MIMO, and cellular optimization. 
• Up to 4 spatial streams (4SS) and 160MHz channel bandwidth (VHT160).

OFDMA: 

•  Supports multiple devices and Wi-Fi 6 clients simultaneously. 

• They do not compete for airtime and bandwidth by using smaller sub-carriers or resource units (RU).

MU-MIMO: By supporting downlink MU-MIMO (5GHz radio), 510 Series allow simultaneous data exchange between multiple single or dual-stream clients.

FLEXIBILITY:

• As standalone access points, unified APs can be more scalable, secure, and manageable.
• Branch offices & remote workers can easily deploy with zero-touch provisioning & cloud-based solution.
• Manages wired and wireless LANs, WANs, and VPNs in Aruba ESP (Edge Services Platform). 
• Security, orchestration, and analytics powered by AI are natively built in.

WIFI FEATURES:

• Improve signal reliability and range with transmit beamforming (TxBF)
• Seamless cellular-to-WiFi carryover for guests with Passpoint Wi-Fi (Release 2)
• RF spectrum optimized by dynamic frequency selection
• Improved receiver performance with Maximum Ratio Combining
• Increased downlink RF performance with CDD/CSD 
• Space-Time Block Coding increases reception and range

IOT FEATURES:

• Supports Bluetooth 5 and 802.15.4 (for Zigbee support) for IoT tracking, security, and location tracking.
• Leverage IoT platforms without adding infrastructure or IT staff.
• Integrate TWT with Aps to schedule client communications

SECURE INFRASTRUCTURE:

ADDITIONAL WIFI FEATURES:

• Boost signal range and reliability with transmit beamforming.
• Passpoint Wi-Fi (release 2) gives guests seamless cellular-to-Wi-Fi transitions.
• Optimize RF spectrum with dynamic frequency selection.
• Combined maximum ratios improve receiver performance.
•  CDD/CSD improves RF performance downlink.
• Space-Time Block Coding increases reception and range.

EXTERNAL FEATURES:

ANTENNA:

• 4x4 MIMO downtilt omnidirectional antennas with 4.2dBi peak antenna gain at 2.4GHz and 7.5dBi at 5GHz.
• Built-in antennas are optimized for horizontal ceiling mounting. 
• Maximum gain is achieved by down tilting 30 degrees.

Note:- Combining the patterns of each antenna in MIMO radios, the peak gain is 3.8dBi in 2.4GHz and 4.6dBi in 5GHz.

Ethernet Port:  

• HPE smart rate RJ45 ports can negotiate speeds up to 2.5 Gbps.
• Auto-detecting link speed (100/1000/2500BASE-T)  and MDI/MDX. 
• Speeds up to 2.5Gbps meet NBase-T and 802.3bz specifications.
• Energy Efficient Ethernet (EEE) complies with IEEE 802.3az standard

USB Port (2.0): Provides up to 1A / 5W of power to attached devices.

visual indicator: Two multi-color LEDs indicate the status of the system.

Reset Button:  Reset to factory settings, LED mode switch (on/off).

Transmit Power (IoT)

• BLE (5.0): Up to 8dBm (class 1) Transmit power, receiving power up to -95dBm.
• Zigbee (802.15.4): Transmitting power up to 8 dBm, -97 dBm receiving sensitivity.
• Peak gains of 3.5dBi are achieved with  30-degree downtilt angle.

MTBF ( Mean Time Between Failures):- At +25C, (MTBF) is about 560,000 hours (64 years).

POWER SOURCE AND CONSUMPTION:

• While both DC power and PoE are available, DC power is Preferred. 
• When powered by DC or 802.3at/802.3bt PoE (class 4 or class 5),  AP is unrestricted. 
• When powered by PoE, the AP starts without restrictions, but restrictions may apply depending on the budget. Restrictions can be applied in any order.

     Note: Power supplies are sold separately.

DEVICE REQUIREMENT

Software version: Aruba InstantOS 8.4.0.0 (with restrictions)

Operating systems: ArubaOS

Note: Use 8.6.0.0 without restriction.

MECHANICAL SPECIFICATIONS:-

Without Mount brack:

Dimensions - 200mm (W) x 200mm (D) x 46mm (H) 

Weight - 810g

With Mount brack:

Dimensions - 230mm (W) x 220mm (D) x 72mm (H)

Weight - 1010g