Aruba Access Point-AP 505-Indoor-WPA3-MPSK-80mhz Bandwidth-WiFi 5 & 6-2x2 MU MIMO-OFDMA-VPN Tunnel-Dual band -IOT Capabilities-Bluetooth 5.0-Zigbee

AP 505 provides high-performance connectivity for organizations struggling with growing IoT, and mobility requirements. With a maximum aggregate data rate of 1.49 Gbps, HE80/HE20 meets the needs of schools, midsize offices, and retailers.

KEY POINTS:

•  Maximum real-world speed up to 1.49 Gbps (HE80/HE20)
•  Enhanced open-source security with WPA3
•  Integrated technology resolves sticky client issues on Wi-Fi 6 and 5 
• OFDMA improves multiuser performance
• IoT support with Bluetooth 5 and Zigbee

SPECIFICATION:

PRODUCT FEATURES:

EFFICIENCY: 

• Optimizes the user experience by reducing airtime contention.
• Includes OFDMA and cellular optimization.
• HE80 supports 80MHz channels, with up to two spatial streams (2SS).

Usage of OFDMA: 

• Handle multiple Wi-Fi 6 devices simultaneously. 
• Clients share channels instead of competing through smaller sub-carriers and resource units (RUs). 

SECURITY:

WPA 3: Enhanced encryption and authentication are provided by latest version of WPA.

Enhanced open: Data and passwords of guest users will be automatically encrypted to protect. 

MPSK ( WPA 2): Changes made to one device are reflected on all others.

VPN Tunnels: Establish a secure connection to VPN concentrator using SSL/IPSec VPN protocols.

IOT CAPABILITY: 

Provides location services, asset tracking, security solutions, and IoT sensor deployment with Bluetooth 5 and 802.15.4 (for Zigbee support). With 500 Series, organizations can leverage IoT as a platform, reducing costs and IT resources. 

WIFI FEATURES: 

• Improve signal range and reliability with transmit beamforming
• Passpoint Wi-Fi 2.0 (Hotspot 2.0): Guests can carry over their cellular data to WiFi
• Optimize the use of RF spectrum with dynamic frequency selection 
• Improved receiver performance with maximum ratio combination
• Improved downlink RF performance with cyclic delay/shift diversity
• Enhance range and reception with space-time block coding
• High-efficiency error correction method for low-density parity checking (LDPC)

OTHER INTERFACES:

Wifi Antenna: 

• Dual-band downtilt omnidirectional antennas with peak gain of 4.9 dBi in 2.4GHz and 5.7 dBi in 5GHz for 2x2 MIMO.
• Downtilt angle of roughly 30 degrees provides maximum gain.
• Built-in antennas are optimized for horizontal ceiling mounts.
• When combining the patterns of each antenna, the peak gain at 2.4GHz and 5GHz is 4.3dBi and 5.6dBi respectively.

Ethernet Port E0:

• Detect link speeds (10/100/1000BASE-T) & MDI/MDX automatically
• Ethernet Power Distribution (PD): 48Vdc (nominal), 802.3af/at (classes 3/4) 
• IEEE 802.3az-based energy-efficient Ethernet

USB 2.0 (Type A): Provides up to 5W/1A.

Visual Indicator: Two multicolored LEDs indicate system and radio status.

Reset button: Factory reset, LED mode (normal/off)

Serial console: Physical port for  Micro-B USB cable

Security slot: Kensington security

IOT POWER :

• BLE (5.0): up to 7dBm transmitter power (class 1), 93dBm receiver sensitivity (1Mbps). 

• Zigbee (802.15.4): 6dBm transmit power, -96dBm receive power

• A vertically polarized omnidirectional antenna with an angle of downtilt at roughly 30 degrees and peak gain of 3.3 dB.

DEVICE POWER:

• Power over Ethernet and DC power support
• When both DC and POE power sources are present, DC power takes precedence
• When powered by DC or 802.3 at (class 4) POE, function without restrictions.
• USB port disabled when system powered by 802.3af (class 3) POE.
• In the same configuration with IPM enabled, restrictions are dynamically applied according to POE budget. Order and restrictions are programmed.
• NOTE: No power sources are included 

EOL: At a temperature of +25°C, the service life is 1.3 million hours (148 years).

DEVICE REQUIREMENT

Operating systems: ArubaOS

Software version: Aruba InstantOS 8.6.0.0

NOTE: A pre-installed mounting bracket secures AP to any mounting kit (sold separately).

MECHANICAL SPECIFICATIONS:-

Without Mount brack:

Dimensions - 160mm (W) x 161mm (D) x 37mm (H) 

Weight - 500g

With Mount brack:

Dimensions - 193mm (W) x 183mm (D) x 63mm (H) 

Weight - 645g